The CR Series Upright is an indispensable tool for a wide range of touring professionals and recording artists. The lean, solid-body CR Series bass takes its place in a long history of fine instruments crafted in the Czech Republic.
Available in 4 and 5 string models, the CR Series neck and body are made from select maple. The full scale fingerboard is graduated for consistent response from note to note, with adjustable relief and bridge height to suit all playing styles. Our Polar™ Bridge Pickup System combines great sound with directional sensitivity, for a rich and expressive response to arco and pizzicato technique. Optional EMG™ magnetic pickups expand the range to include classic electric bass sounds.
LENGTH: 132 cm (52″)
WEIGHT: 4.8 kg (10.5 lbs.)
SCALE LENGTH: 106 cm (41.73″)
STRINGS: 4 or 5 (Low B or high C)
CONSTRUCTION: Solid rock maple neck and body, flame maple face.
FINISH: Traditional amber stain with clear semi-gloss polymer coating. Custom finish options are available for the CR Double Bass Series including Slate Gray, Quilted Maple, Poplar Burl and Zebrawood. Click here to see examples of these Custom finishes.
FINGERBOARD: Hand graduated, asymmetric relief, cascading dot pattern for position reference; 43.1mm (1.7″) wide at nut; 89.0mm (3.5″) max. width.
BRIDGE: Hard maple; radius 7.9cm (3.1″) string spacing 81mm (3.19″).
NUT: Radius 7.9cm (3.1″); string spacing 30mm (1.19″).
BRIDGE PICKUP: The Polar directional piezo pickup system responds selectively to either vertical vibration (for the sustained plucked sound, like an electric bass guitar), or lateral vibration (for dynamic bowing, and a percussive plucked sound).
MAGNETIC PICKUP (for CR4M and CR5M only): Low impedance EMG magnetic pickup system, with individually adjustable coils, neodymium magnets and low noise, hum-canceling preamp. Produces smooth pizzicato tone not unlike an electric bass guitar. (Magnetic pickups are not recommended for bowing.)
ELECTRONICS: 18-volt active circuit by EMG. Mono output.